Your V24R Baby Unit (i.e. camera) is paired to the Parent Unit (i.e. hand-held monitor) when supplied. There is no need to pair the units again unless the Baby Unit loses its link with the Parent Unit.
How do I pair my cameras?
To renew the pairing of your units or pair a new/additional Baby Unit, follow the procedure below:
Note: Before you begin pairing, be sure to have the Baby and Parent Units side by side and turned on.
- Press the MENU/EXIT button and the menu screen will be displayed on the Parent Unit.
- Press the LEFT button or RIGHT button until the PAIR icon is highlighted in red and then press OK to confirm.
- Press the LEFT button or RIGHT button to select the desired camera to pair. Press OK button to start the pairing.
- While the camera icon & LED are flashing, press and hold the PAIR button in the back of Baby Unit.
- Once paired, an image from the paired camera will display on the screen.
- If unsuccessful, please repeat the above steps.
- Press the MENU/EXIT button to Exit.
How do I unpair my cameras?
-
- Press the MENU/OK button on your Parent Unit and the menu screen will pop up.
- Press the LEFT button or RIGHT button until the PAIR icon is highlighted in red.
- Then press the MENU/OK button and a secondary menu with camera options will pop up.
- Press the LEFT button or RIGHT button to select the desired Baby Unit to delete and press the MENU/OK button.
- The chosen Baby Unit will start blinking. Press and hold the PAIR button in the back of a Baby Unit you want to keep.
- The above procedure will automatically remove the Baby Unit you want to delete. The Baby Unit you want to keep will override the position of the Baby Unit you deleted.
- Press the EXIT button to exit the menu.