If you've manually adjusted the lens of your See+ or Fullpeek Wi-Fi camera, you might notice that the PTZ (Pan-Tilt-Zoom) function no longer responds properly. The camera may only move slightly or not at all when controlled via the app.
🛠️ How to Re-Calibrate Your Camera Based on the Model:
For See+ Camera
🔌 Simply unplug the camera from the power source and plug it back in.
✅ The camera will automatically re-calibrate its position.
For Fullpeek Camera
📱 Use the app to move the camera in the opposite direction for about 20 seconds, then release.
🔄 Alternatively, you can re-pair the camera through the app.
✅ Both actions will reset and re-calibrate the camera’s position automatically.
Need any help? Feel free to contact us!