When using the VOX function, the sound and video transmission will stop (standby mode) if the Baby Unit does not register any sound within 30 seconds.
While in standby mode, the LCD screen turns off. Once the Baby Unit registers a sound, louder than the set sensitivity level, it will automatically start transmitting the signal (sound and video) to the Parent Unit and the LCD screen will turn on.
NOTE: VOX default setting is OFF in the supplied product. To change the VOX level, please follow the instructions below:
- Press the Menu/Back key to access the menu, choose VOX and press OK
- Navigate with the arrow keys to select the desired vox level.
NOTE:
- VOX-LOW - Low sensitivity level - higher sound level is required to reactivate the transmission
- VOX-MED - Medium sensitivity level - medium sound level is required to reactivate the transmission
- VOX-HIGH - High sensitivity level - low sound level is required to reactivate the transmission
- VOX-OFF - Constant transmission – no standby mode.
To resume the video and audio signal manually on your parent unit when VOX function is on, briefly press the Power button.