Babysense MaxView PAIRING issues

 

A. Quick Check

Avoid 2.4GHz devices such as your mobile phone, portable computer, other cameras, which are connected to home Wi-fi network at least 5 feet away.
If you still encounter the problem, please move to step B.

 

B. Reset the Parent Unit

1. Disconnect the Camera and Parent Unit (monitor) from their power adaptors.
2. Insert a sharp pin into the reset hole at the back of the parent unit (monitor), and hold it for 10 seconds. It is located underneath the kickstand.
3. Ensure your antenna is raised.

RESET mx.png

If you still encounter the problem, please move to step C.

 

C. Switch Adaptors

1. Switch between the power adapters of the Camera and Parent Unit (monitor).
2. Let the parent unit (monitor) charge for a while before turning it back on.

 

 

 

Updated

Was this article helpful?

0 out of 1 found this helpful

Have more questions? Submit a request