Doing a quick daily check is the best way to make sure your Babysense 7 monitor is working just right. It only takes a moment and gives you peace of mind that your baby’s movements are being monitored correctly. This guide will walk you through the simple steps and help you avoid common mistakes, like relying on just removing your baby from the crib.
To ensure your Babysense 7 Breathing Movement Monitor is working properly, it's important to perform a daily performance test.
Important:
Simply removing your baby from the crib and waiting for the alarm is not a valid test. Environmental factors—like fans, air conditioners, or vibrations—can delay the alarm and lead to incorrect assumptions about the device's performance.
Correct Performance Test Procedure
-
Set up as usual:
Keep the same conditions as your baby’s typical sleep environment (e.g., windows open, fan or air conditioner on). -
Remove the baby from the crib.
-
Turn on the device and step back about two steps from the crib.
-
Wait for the alarm:
The alarm should sound within 20 seconds due to the absence of movement.-
The alarm may sound with or without a ticking sound beforehand.
-
If the Alarm Does Not Sound:
-
Check for disturbances like:
-
Fans or ACs blowing directly on the crib
-
Vibrating toys or crib mobiles
-
-
Adjust as needed:
Change the direction or strength of airflow, turn off vibrating items, or reposition the crib.
Then, repeat the test. If the alarm activates within 20 seconds after making adjustments, the monitor is working correctly.
By performing this quick daily check, you ensure your Babysense 7 continues to provide accurate, reliable monitoring for your baby’s safety.
A quick test each day helps keep your Babysense 7 accurate and dependable. Just follow the steps, check for anything that might interfere, and adjust if needed. It’s a small habit that makes a big difference in your baby’s safety and your peace of mind.
Need any help? Feel free to contact us!
Updated