Overview
Setting up your Babysense Prisma is quick and straightforward. This article walks you through powering on both the baby unit (camera) and the parent unit, charging the parent unit, and placing the camera for optimal monitoring.
Power on the Baby Unit (Camera)
1. Connect the camera power adapter to the charging port on the back bottom of the baby unit.
2. Plug the AC power adapter into a wall outlet.
3. Make sure the ON/OFF switch on the back of the camera is set to the ON position.
4. The camera will power on automatically and the green power LED will light up.
Power on the Parent Unit
1. Connect the parent unit power adapter to the charging port on the left side of the parent unit.
2. Plug the AC power adapter into a wall outlet.
3. Press and hold the Power button on the top left of the parent unit for 5 seconds.
4. The green power LED will light up and the "Babysense" logo will appear on the screen.
5. Both units are now on — the parent unit will display live video from the camera.
Place the Camera
1. Position the camera on a flat surface at least 6 feet (2 meters) from the baby’s crib. You may also wall-mount it.
2. Aim the camera toward the area you want to monitor, ensuring a clear line of sight.
3. Make sure the camera and all cords are completely out of reach of the baby and other young children.
Important Notes
- Only use the AC power adapters included in the package.
- The parent unit contains a built-in rechargeable Li-ion battery (3.7V, 4000 mAh). Charge fully before first use — approximately 8 hours.
- The baby unit (camera) must remain connected to AC power at all times during use.
- Never place the baby unit inside the crib, bed, or playpen.
- Keep the camera at least 5 feet from Wi-Fi routers and microwave ovens to avoid interference.
Need help?
Let our Customer Service Team know.
Click here