Your V43 Baby Unit (i.e. camera) is paired to the Parent Unit (i.e. hand-held monitor) when supplied. There is no need to pair the units again unless the Baby Unit loses its link with the Parent Unit.
How do I pair my cameras?
To renew the pairing of your units or pair a new/additional Baby Unit, follow the procedure below:
NOTE: Before you begin pairing, be sure to have the Baby and Parent Units side by side and turned on.
- Press the MENU/OK button on your Parent Unit and the menu screen will pop up.
- Navigate through the menu icons using the PAN/TILT/MENU NAVIGATION keys to the “Pair” menu option.
- Navigate through the options using the PAN/TILT/MENU NAVIGATION keys and press the MENU/OK button to choose the camera you want to pair.
- A “Pairing” message will pop up in the middle of the screen. Press and hold the PAIR button in the back of Baby Unit until the connection is established.
- Once paired, an image from the paired Baby Unit will display on the screen.
- Press the EXIT turned to exit the menu.
- If unsuccessful, please repeat above steps.
- NOTE: If there is more than one Baby Unit to be paired, repeat the above steps for each one individually.
How do I unpair my cameras?
-
- Press the MENU/OK button on your Parent Unit and the menu screen will pop up.
- • Press the PAN/TILT/MENU NAVIGATION keys until the PAIR icon is highlighted in red.
- Then press the MENU/OK button and a secondary menu with camera options will pop up.
- Press the PAN/TILT/MENU NAVIGATION keys to select the desired Baby Unit to delete and press the MENU/OK button.
- • The chosen Baby Unit will start blinking. Press and hold the PAIR button in the back of a Baby Unit you want to keep.
- • The above procedure will automatically remove the Baby Unit you want to delete.
- The Baby Unit you want to keep will override the position of the Baby Unit you deleted.
- • Press the EXIT button to exit the menu.