Babysense HDS2 TEMPERATURE issues

 

A. Quick Check

1. Thermometer results may differ between 1 and 2 degrees.

2. Ensure good air circulation and keep the camera sensor away from the camera body.

If you still encounter the problem, please move to step B.

 

B. Delete Paired Cameras

1. Access your menu.
2. Navigate to select the camera/s you want to delete.

If you still encounter the problem, please move to step C.

 

C. Reset the Parent Unit

1. Disconnect the Camera and Parent Unit (monitor) from their power adaptors.
2. Insert a sharp pin into the reset hole at the back of the parent unit (monitor), and hold it for 10 seconds. It is located underneath the kickstand.
3. Ensure your antenna is raised.

If you still encounter the problem, please move to step D.

 

D. Switch Adaptors

1. Switch between the power adapters of the Camera and Parent Unit (monitor).
2. Let the parent unit (monitor) charge for a while before turning it back on.

Updated

Was this article helpful?

0 out of 18 found this helpful

Have more questions? Submit a request