Baby Unit (i.e. camera) is paired to the Parent Unit (i.e. hand-held monitor) when supplied. There is no need to pair the units again unless the Baby Unit loses its link with the Parent Unit.
To renew the pairing of your units or pair a new/additional Baby Unit, follow the procedure below:
- NOTE: Before you begin pairing, be sure to have the Baby and Parent Units side by side and turned on.
- Press the MENU/OK button on your Parent Unit and the menu screen will pop up.
- Navigate through the menu icons using the PAN/TILT/MENUNAVIGATION keys to the “Pair” menu option.
- Navigate through the options using the PAN/TILT/MENU NAVIGATION keys and press the MENU/OK button to choose the camera you want to pair.
- A “Pairing” message will pop up in the middle of the screen. Press and hold the PAIR button in the back of Baby Unit until the connection is established.
- Once paired, an image from the paired Baby Unit will display on the screen.
- Press the EXIT turned to exit the menu.
- If unsuccessful, please repeat above steps.
- NOTE: If there is more than one Baby Unit to be paired, repeat the above steps for each one individually.
How do I unpair my cameras?
- Press the MENU/OK button on your Parent Unit and the menu screen will pop up.
- Press the PAN/TILT/MENU NAVIGATION keys until the PAIR icon is highlighted in red.
- Then press the MENU/OK button and a secondary menu with camera options will pop up.
- Press the PAN/TILT/MENU NAVIGATION keys to select the desired Baby Unit to delete and press the MENU/OK
- The chosen Baby Unit will start blinking. Press and hold the PAIR button in the back of a Baby Unit you want to keep.
- The above procedure will automatically remove the Baby Unit you want to delete.
- The Baby Unit you want to keep will override the position of the Baby Unit you deleted.
- Press the EXIT button to exit the menu.