If you're using a crib or mattress with a spring base, it's important to ensure that the baby’s chest movements are properly detected by the Babysense sensor pads. In some spring-based cribs, the baby's subtle movements might not transmit well through the mattress, which can lead to false alarms.
✅ Solution: Add a Firm Surface Under the Sensor Pads
To improve sensitivity and ensure accurate monitoring, place a wooden board (plywood) under each sensor pad. This helps create a stable and flat surface, ensuring the sensors stay in close contact with the mattress and detect your baby’s movements correctly.
📏 Recommended Board Specifications:
- Size: Minimum 17’’ x 11’’ (43 x 28 cm)
- Thickness: At least 1/2’’ (1.2 cm)
🛠️ How to Set It Up:
- Place the wooden board directly under the mattress, where the sensor pad will sit.
- Put the sensor pad on top of the wooden board.
- Ensure everything is level and stable.
- Make sure to place a separate board under each sensor pad.
🖼 Example Setup:
💡 Tip: Using the recommended wooden board is especially helpful with spring mattresses. It ensures the Babysense device works as intended—providing accurate movement detection and peace of mind.
Need any help? Feel free to contact us!